Categories


BARNES VARMIN-A-TOR™ BULLETS BARNES BULLETS

brownells Reloading

Quick View
Click here for price!$18.99 - $21.99
 
    • View
      • BARNES VARMIN-A-TOR™ BULLETS BARNES BULLETS

      • Varmin-A-Tor bullets combine explosive performance with deadly accuracy for spectacular results on varmints up to coyote size. The classic-style flat base bullet has a thin, tapered jacket surrounding the Deton-A-Tor™ lead core hollow-point that features a scored nose cavity to create devastating expansion and drop-dead hits. The value price gives you the maximum bang for your buck for all types of varmint shooting.

        Sinclair, Issue:5B, Page:116

ALOX BULLET LUBE LYMAN

brownells Reloading

Quick View
Click here for price!$5.69
 
    • View
      • ALOX BULLET LUBE LYMAN

      • Original Lyman Alox Lube is easy to apply and coats the entire bullet with a very thin film of lubricant that dries to a soft, varnish-like finish. Won't contaminate powder. Great all-around lubricant for loads up to around 2,000 fps.Warning: Melting lead and casting lead objects will expose you and others in the area to lead, which is known to cause birth defects, other reproductive harm and cancer. See Instructions on Reducing Exposure supplied with product.

        Sinclair, Issue:5B, Page:091

WILSON 50 BMG NECK REAMER L.E. WILSON, INC.

brownells Reloading

Quick View
Click here for price!$49.99
 
    • View
      • WILSON 50 BMG NECK REAMER L.E. WILSON, INC.

      • Remove excess case neck material from 50 BMG cases with this steel Wilson Neck Reamer. When used with the Wilson Case Trimmer it gives an adequate clearance between the case neck and the chamber. Proper case preparation using this neck reamer will reduce the risk of having a thick neck that can lead to high chamber pressure and improve ballistic accuracy. Remove the existing case trimmer cutter on the L.E. Wilson Case Trimmer and replace with the Wilson 50 BMG Neck Reamer.

        Sinclair, Issue:5B, Page:011 Sinclair, Issue:5B, Page:079

RIFLE BRASS LAPUA

brownells Reloading

Quick View
Click here for price!$62.99 - $289.99
  (25)
    • Check Price
      • RIFLE BRASS LAPUA

      • Many shooters have found Lapua brass to be considerably superior in quality to most other brass available. All Lapua cases are strong and uniformly precise. Lapua cases are manufactured to be reloaded, again and again, dozens of times. The base section is hard and strong, and the dimensions remain constant and will hold primers tight in the primer pocket even after repeated reloading. The brass body section is hard and firm. It is easy to extract after firing, whether full length sizing or only neck sizing. Strict tolerances in concentricity and wall thickness are used in manufacturing. The neck and shoulder are annealed to withstand repeated reloading. Packaged in a plastic case, 100 cases per package. Big Book Catalog, Issue:68, Page:543 Sinclair, Issue:5B, Page:120

SINCLAIR CONCENTRICITY GAUGE SINCLAIR INTERNATIONAL

brownells Reloading

Quick View
Click here for price!$89.99 - $149.99
  (1)
    • Check Price
      • SINCLAIR CONCENTRICITY GAUGE SINCLAIR INTERNATIONAL

      • We believe the Sinclair Concentricity Gauge is the easiest to use and most accurate gauge of its kind on the market. Precision made for a lifetime of use, the Sinclair Concentricity Gauge will accept cases up to 50 BMG. The Sinclair Concentricity Gauge is used to measure runout by rotating the case or loaded round on two sets of bearings that are captured in anodized aluminum blocks. These bearing blocks are adjustable longitudinally to allow for different case lengths or varying lengths of loaded rounds. The handloader can measure sized cases on the neck, and measure loaded rounds on the neck or out on the bullet. The bearing blocks ride in a milled slot in the gauge base plate. This milled slot keeps the blocks in alignment with each other. This arrangement provides the best support for the cartridge, enabling the user to spin the cartridge smoothly. Large thumb levers on the bearing blocks make adjustments quick and easy. The anodized base plate is extremely stable allowing the user to take accurate readings. The indicator tower is designed to permit vertical and side-to-side adjustment of the dial indicator. The mounting block for the dial indicator is designed to accommodate dial indicators with standard 0.375" mounts. This is a quality measuring tool for the serious precision reloader. Big Book Catalog, Issue:68, Page:532 Sinclair, Issue:5B, Page:029

T-7 TURRET PRESS REDDING

brownells Reloading

Quick View
Click here for price!$21.99 - $302.99
  (45)
    • Check Price
      • T-7 TURRET PRESS REDDING

      • The T-7 Turret Press features a seven station turret head, cast iron construction, and powerful compound linkage. Its rear casting supports a rock solid turret for precise alignment. The T-7 incorporates a one inch diameter ram and accepts 7/8 inch to fourteen inch threaded dies, including the longer Competition dies. Additional interchangeable turret heads may be purchased. This is the only turret press we recommend buying. The Automatic Primer Feed Assembly sold separately. 1911, Issue:11, Page:067 Big Book Catalog, Issue:68, Page:536 Sinclair, Issue:5B, Page:059

CHARGEMASTER POWDER DISPENSER / SCALE COMBO RCBS

brownells Reloading

Quick View
Click here for price!$349.99 - $389.99
  (59)
    • Check Price
      • CHARGEMASTER POWDER DISPENSER / SCALE COMBO RCBS

      • Throws Precise, Consistent Powder Charges; Programmable Memory Stores Your Favorite Loads Automated powder measure system combines two precision RCBS products – the Chargemaster 1500 Scale and Chargemaster Automatic Powder Dispenser – that let you meter out exact charges of smokeless powder for almost any-size cartridge. Accurately weighs and dispenses from 2 to 300 grains of any extruded (stick), ball (spherical), and flake smokeless powder. Not only accurate but fast, too, for a “trickle” dispenser: average dispensing time is about 20 seconds for a 60 grain extruded powder charge.    Electronic control lets you simply punch in the exact-size charge you need – and stores up to 30 of your favorite loads in memory for instant recall. The front-to-back layout allows easy access to the scale for right or left-handed users. The clear cover eliminates fluctuations in charge weight caused by air currents. Powder drain lets you easily empty the powder hopper.    Power to the scale is provided by a direct connection from the dispenser to the scale, so there’s is only one power cord to wrangle. If you already own a Chargemaster 1500 scale, the dispenser may be purchased separately. Do not use with black powder. 1911, Issue:11, Page:068 Big Book Catalog, Issue:68, Page:538 Sinclair, Issue:5B, Page:007 Sinclair, Issue:5B, Page:088

BERGER TARGET BULLETS BERGER BULLETS

brownells Reloading

Quick View
Click here for price!$27.99 - $365.99
  (71)
    • Check Price
      • BERGER TARGET BULLETS BERGER BULLETS

      • The Berger Target bullet line is made up of the many legendary bullets that have been winning matches and setting records for decades. Berger Bullets was started because Walt Berger wanted better results while competing in target shooting matches. Making Match Grade bullets for target competition shooters is Berger's core competency. All of Berger's success as the producer of consistent bullets for Varmint, Target and Hunting stems from the efforts Berger has made to produce the best bullets available for the extreme, precision focused, target competition shooter. Big Book Catalog, Issue:68, Page:541 Sinclair, Issue:5B, Page:102

BRASS 100 CT BAGS NORMA

brownells Reloading

Quick View
Click here for price!$63.99 - $234.99
  (80)
    • Check Price
      • BRASS 100 CT BAGS NORMA

      • Norma Brass provides the serious reloader a premium grade, quality cartridge to reload. Norma Brass is bulk packed from the same lot. We try to keep a good supply of brass in inventory, but due to factory production and delivery delays, we may occasionally be out of some cartridges. Norma Brass is made to such exact standards that the cartridges typically include machined case heads, drilled (not punched) flash holes and close tolerance wall thickness. Brass is packaged in 100 count bags. Big Book Catalog, Issue:68, Page:543 Sinclair, Issue:5B, Page:120

BULK RIFLE BULLETS HORNADY

brownells Reloading

Quick View
Click here for price!$399.99 - $859.99
  (91)
    • Check Price
      • BULK RIFLE BULLETS HORNADY

      • Hornady bulk rifle bullets are great for target practice as well as varmint shooting and plinking. These bullets feature a copper jacket with a lead core. Available in popular calibers for high volume shooters. Shoot more with these inexpensive bulk bullets!

SIERRA MATCHKING BULLETS SIERRA BULLETS, INC.

brownells Reloading

Quick View
Click here for price!$14.79 - $220.99
  (40)
    • Check Price
      • SIERRA MATCHKING BULLETS SIERRA BULLETS, INC.

      • For serious rifle competition, you'll be in championship company with MatchKing® bullets. The hollow point boat tail design provides that extra margin of ballistic performance match shooters need to fire at long ranges under adverse conditions. Big Book Catalog, Issue:68, Page:542 Sinclair, Issue:5B, Page:100 Sinclair, Issue:5B, Page:101

STARLINE BRASS STARLINE, INC

brownells Reloading

Quick View
Click here for price!$16.99 - $82.99
  (24)
    • Check Price
      • STARLINE BRASS STARLINE, INC

      • A great shot starts with Starline Brass the maker of America's finest straight wall brass. Starline prides itself on being the choice of top handgun shooters across all disciplines, with a production process focused on quality not quantity. Packaged in 100 count bags. 1911, Issue:11, Page:070 Big Book Catalog, Issue:68, Page:541 Sinclair, Issue:5B, Page:119

STAINLESS ULTIMATE TRIMMER SINCLAIR/L.E. WILSON

brownells Reloading

Quick View
Click here for price!$189.99
  (66)
    • Check Price
      • STAINLESS ULTIMATE TRIMMER SINCLAIR/L.E. WILSON

      • The legendary L.E. Wilson Case Trimmer has just gotten better. Exclusive to Sinclair International, the L.E. Wilson Case Trimmer is now offered in a Stainless Steel model. We’ve paired the most accurate trimmer in the world with our Sinclair Micrometer head to create the Sinclair Stainless Ultimate Trimmer. The L.E. Wilson Case Trimmer aligns and holds your cases square to the cutter during the trim process. This results in a virtually identical trim length for each case. It is accomplished with L.E. Wilson’s unique case holder system which holds the case by the body taper. The trimmer case holder, cutter housing, and micrometer adjustment unit sit in perfect alignment. No pilots or collets are utilized which could influence the trim results negatively. Now in stainless steel, the L.E. Wilson Trimmer is built to last for a lifetime of use. Our Sinclair Micrometer head allows the reloader to easily adjust trim length in increments of .001" with an adjustment length of over 2". Our micrometer reads in “actual” case length, making it the most pleasurable micro trimmer to work with. Determine your trim length, dial to the exact length on the micrometer, and you’re ready – it’s that simple. The micrometer features crisp, easy-to-read engravings and may be locked in place when set. Easily accommodates cases from 22 Hornet to 416 Rigby. When trimming cases shorter than 1.3” such as pistol cases, the use of a spacer (#749-002-094) is necessary. Completing the Sinclair Stainless Ultimate Trimmer is our Sinclair Mounting Stand with Shark Fin Clamp. This system makes easy work of installing and removing your trimmer case holder in a smooth “swing-arm” motion. The Shark Fin trimmer clamp secures the case head firmly against the micrometer adjustment head for a quick and accurate, chatter-free trim. * Trimmer Case Holders and accessories sold separately. Big Book Catalog, Issue:68, Page:529 Sinclair, Issue:5B, Page:010

PISTOL PRIMERS CCI

brownells Reloading

Quick View
Click here for price!$31.99 - $165.99
  (7)
    • Check Price
      • PISTOL PRIMERS CCI

      • These are the “bread-and-butter” of reloading, the most commonly called-for primers in reloading recipes. CCI standard primers are remarkably clean-burning, leaving primer pockets cleaner and extending the time between pocket cleaning. That’s a huge benefit for progressive reloaders. They are more sensitive and easier to seat than older CCI primers, and engineered for smooth feeding in automated equipment. Clean-burning initiator compound Larger “sweet spot” for guns that produce  off-center strikes Easier to seat than ever before Improved sensitivity for “critical-need” loading 1911, Issue:11, Page:070 Big Book Catalog, Issue:68, Page:545 Sinclair, Issue:5B, Page:117

RIFLE PRIMERS CCI

brownells Reloading

Quick View
Click here for price!$31.99 - $165.99
  (34)
    • Check Price
      • RIFLE PRIMERS CCI

      • These are the “bread-and-butter” of reloading, the most commonly called-for primers in reloading recipes. CCI standard primers are remarkably clean-burning, leaving primer pockets cleaner and extending the time between pocket cleaning. That’s a huge benefit for progressive reloaders. They are more sensitive and easier to seat than older CCI primers, and engineered for smooth feeding in automated equipment. Clean-burning initiator compound Larger “sweet spot” for guns that produce  off-center strikes Easier to seat than ever before Improved sensitivity for “critical-need” loading. Big Book Catalog, Issue:68, Page:545 Sinclair, Issue:5B, Page:117

UNPRIMED RIFLE BRASS HORNADY

brownells Reloading

Quick View
Click here for price!$26.99 - $99.99
  (12)
    • Check Price
      • UNPRIMED RIFLE BRASS HORNADY

      • Hornady unprimed brass features tight tolerances, uniform concentricity, consistent weight and capacity. Their manufacturing processes ensure consistent bullet seating and uniform bullet release for optimal velocity and accuracy. Target shooters insist on uniform case wall thickness and tight tolerances. Hornady delivers this by treating brass as the foundation for an accurate cartridge, not as a commodity. Big Book Catalog, Issue:68, Page:543 Sinclair, Issue:5B, Page:119

NOSLER BRASS NOSLER, INC.

brownells Reloading

Quick View
Click here for price!$34.99 - $84.99
  (86)
    • Check Price
      • NOSLER BRASS NOSLER, INC.

      • Nosler takes a few extra steps with their brass to make it a premium component for the handloader. The brass is first weigh-sorted to within + or - 0.5 grains, then the flash holes are deburred. Nosler completes the case prep with neck sizing and chamfering the inside and outside of the case mouth. All Nosler unprimed brass bears the Nosler headstamp. Sold in boxes of 50 unless stated otherwise. Big Book Catalog, Issue:68, Page:543 Sinclair, Issue:5B, Page:120

PISTOL PRIMERS WINCHESTER

brownells Reloading

Quick View
Click here for price!$30.99 - $149.99
  (61)
    • Check Price
      • PISTOL PRIMERS WINCHESTER

      • Same Primers Used In Factory Ammo Help Ensure Reliable, Positive Ignition Of Reloads Winchester primers give instant, hot ignition and are easy to seat into primer pockets. Preferred by many hunters and competitors for their ability to maintain stability in temperature and humidity extremes. REMEMBER: There is a UPS Hazardous charge per package for powder or primers. Powder and primers may be shipped together in the same package. Powder, primers or ammunition may NOT be shipped out of the United States. 1911, Issue:11, Page:070 Big Book Catalog, Issue:68, Page:545 Sinclair, Issue:5B, Page:117

ULTIMATE TRIMMER & PLATFORM KIT SINCLAIR/L.E. WILSON

brownells Reloading

Quick View
Click here for price!$199.99
  (72)
    • Check Price
      • ULTIMATE TRIMMER & PLATFORM KIT SINCLAIR/L.E. WILSON

      • SINCLAIR STAINLESS ULTIMATE TRIMMER - The legendary L.E. Wilson Case Trimmer has just gotten better. Exclusive to Sinclair International, the L.E. Wilson Case Trimmer is now offered in a Stainless Steel model. We’ve paired the most accurate trimmer in the world with our Sinclair Micrometer head to create the Sinclair Stainless Ultimate Trimmer. The L.E. Wilson Case Trimmer aligns and holds your cases square to the cutter during the trim process. This results in a virtually identical trim length for each case. It is accomplished with L.E. Wilson’s unique case holder system which holds the case by the body taper. The trimmer case holder, cutter housing, and micrometer adjustment unit sit in perfect alignment. No pilots or collets are utilized which could influence the trim results negatively. Now in stainless steel, the L.E. Wilson Trimmer is built to last for a lifetime of use. Our Sinclair Micrometer head allows the reloader to easily adjust trim length in increments of .001" with an adjustment length of over 2". Our micrometer reads in “actual” case length, making it the most pleasurable micro trimmer to work with. Determine your trim length, dial to the exact length on the micrometer, and you’re ready – it’s that simple. The micrometer features crisp, easy-to-read engravings and may be locked in place when set. Easily accommodates cases from 22 Hornet to 416 Rigby. When trimming cases shorter than 1.3” such as pistol cases, the use of a spacer (part number WX11) is necessary. Completing the Sinclair Stainless Ultimate Trimmer is our Sinclair Mounting Stand with Shark Fin Clamp. This system makes easy work of installing and removing your trimmer case holder in a smooth “swing-arm” motion. The Shark Fin trimmer clamp secures the case head firmly against the micrometer adjustment head for a quick and accurate, chatter-free trim. * Trimmer Case Holders and accessories sold separately. PLATFORM - The idea for this platform originated from a writer/customer of ours. The platform is a mounting board for the L.E. Wilson trimmer series that provides storage space for nine (9) case holders and a tapping block for knocking the cases out of the holder. The polyethylene platform has rubber feet, but most of us prefer it c-clamped to the bench. Big Book Catalog, Issue:68, Page:529 Sinclair, Issue:5B, Page:010

CO-AX RELOADING PRESS FORSTER

brownells Reloading

Quick View
Click here for price!$299.99
  (36)
    • Check Price
      • CO-AX RELOADING PRESS FORSTER

      • This heavy duty press has several innovative features that make it one of the best reloading presses for threaded dies on the market. The design includes: 1) Snap-in, snap-out die change making die changing a two second operation, 2) Automatic self-acting shellholder which supports the case by spring loaded jaws, 3) Positive spent primer catcher collects spent primers and carbon in a container. This press can be used with all standard 7⁄8"-14 dies (many of them with existing lock rings). Works with all Redding Competition Dies. Big Book Catalog, Issue:68, Page:535 Sinclair, Issue:5B, Page:048 Sinclair, Issue:5B, Page:062

TYPE S MATCH BUSHING FULL DIE SETS REDDING

brownells Reloading

Quick View
Click here for price!$161.99 - $239.99
  (26)
    • Check Price
      • TYPE S MATCH BUSHING FULL DIE SETS REDDING

      • The Redding Type S Match Bushing Full Die Set contains a Type S Bushing Full Sizing Die and a Compeition Seating Die. The Type S Bushing Full Die allows full length resizing while maintaining exact control of the case neck. Interchangeable bushings allow you to determine your own level of sizing and neck tension. The Competition Bullet Seating Die features a micrometer calibrated in .001" increments and floating seating stem system which help eliminate concentricity problems.   Big Book Catalog, Issue:68, Page:534 Sinclair, Issue:5B, Page:038

COMPETITION BUSHING NECK DIE SETS REDDING

brownells Reloading

Quick View
Click here for price!$112.99 - $341.99
  (1)
    • Check Price
      • COMPETITION BUSHING NECK DIE SETS REDDING

      • Redding Competition Bushing Neck Die Set includes a Competition Bushing Neck Sizing Die, a Body Die, and a Competition Bullet Seater. Neck Sizing Die and Seater feature micrometer adjustments. Bushings and Shellholder sold separately. Competition Bushing Neck Die -  With this die, the cartridge case is completely supported and aligned with the sizing bushing before the sizing process begins. As the sizing process starts, the cartridge case remains supported in the tightly chambered, sliding sleeve as it moves upward while the resizing bushing self-centers on the case neck. The decapping rod is maintained in precise alignment by using the internal parts of the die as a linear support much like that of a firing pin. Meanwhile, the micrometer adjustment of the bushing position delivers precise control to the desired amount of neck length to be sized. Body Die -designed to full length resize the case body and bump the shoulder position for proper chambering without disturbing the case neck. Competition Bullet Seater - Tighter manufacturing tolerances have been made possible due to the details of the floating seating stem system. The bullet guide to seating stem fit is so precise that the seating stem can actually be demonstrated to "float" Big Book Catalog, Issue:68, Page:534 Sinclair, Issue:5B, Page:036 Sinclair, Issue:5B, Page:038

WILSON CASE GAGE L.E. WILSON, INC.

brownells Reloading

Quick View
Click here for price!$26.99 - $42.99
  (68)
    • Check Price
      • WILSON CASE GAGE L.E. WILSON, INC.

      • The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY Big Book Catalog, Issue:68, Page:532 Sinclair, Issue:5B, Page:035 Sinclair, Issue:5B, Page:079

BERGER HUNTING BULLETS BERGER BULLETS

brownells Reloading

Quick View
Click here for price!$34.99 - $269.99
  (1)
    • Check Price
      • BERGER HUNTING BULLETS BERGER BULLETS

      • The Berger Hunting bullet line is proving to be the most lethal big game hunting bullets available. All of the Berger Hunting bullets are made in the VLD design. The VLD design incorporates a sharp nose that allows the bullet to penetrate 2” to 3” before it starts to expand. After the bullet starts to expand it will shed 40% to 85% of its weight as shrapnel into the surrounding tissue (internal organ). The combination between the shrapnel and the hydrostatic shock produces a massive wound cavity within the vital area (internal organs) that will be 13” to 15” long. This massive wound cavity results in the animal dropping fast since most go into shock after such a tremendous blow. Those animals that don’t go down immediately will soon succumb to blood pressure loss and/or organ failure producing a quick ethical kill. Berger bullets don't poke through like an arrow (high weight retention, deep penetration bullets) but instead dump their energy where it is most effective, inside the animal. Using the Berger VLD will result in an animal that goes down fast so you can enjoy the results of your hunt without having to track the wounded animal after the shot. Big Book Catalog, Issue:68, Page:541 Sinclair, Issue:5B, Page:103

SINCLAIR PRIMING TOOL SINCLAIR INTERNATIONAL

brownells Reloading

Quick View
Click here for price!$19.99 - $119.99
  (16)
    • Check Price
      • SINCLAIR PRIMING TOOL SINCLAIR INTERNATIONAL

      • The Sinclair Priming Tool is one of the finest tools we manufacture. Handloaders around the world have told us “this is the best priming tool in the world”. The Sinclair Priming Tool is manufactured from the finest materials available. The main body, head, and punch housings are all made of stainless steel, the handle is machined from aircraft grade aluminum, and the pins and pushrod are hardened. These materials insure the owner a lifetime of trouble-free use. The Sinclair Priming Tool comes complete with housings and punches for both large and small primers. The tool head utilizes Sinclair Priming Tool Shellholders and locks the case head square to the priming punch. The leverage of the tool is outstanding, yet extremely sensitive so you can feel the primer entering the primer pocket and bottoming out. Our tool is made for single feeding of primers. Our tool is expensive but made with consideration for quality and to provide the user with a well-made tool that will last a lifetime and more. There are no plastic parts to wear or break. Shellholders purchased separately. 1911, Issue:11, Page:065 Big Book Catalog, Issue:68, Page:531 Sinclair, Issue:5B, Page:023

TYPE S BUSHING FULL DIES REDDING

brownells Reloading

Quick View
Click here for price!$59.49 - $274.99
  (27)
    • Check Price
      • TYPE S BUSHING FULL DIES REDDING

      • Full Length resizing while maintaining exact control of the case neck is oftern desirable in one operation. The Redding Type S Bushing Full Length Sizing Dies accomplish this task with the precision you would expect from Redding. Uses the same interchangeable bushings as those used in Redding bushing style neck sizing dies. The adjustable decapping rod allows you to adjust the bushing position, sizing only part of the neck length when desired Concentricity is enhanced by the ability of the bushing to self-center on the neck of the cartridge case All Type S dies are supplied with both the standard size button and a decapping pin retainer. By removing the bushing and all internal parts, the Type S Bushing Full Die may also be used as a body die.   Big Book Catalog, Issue:68, Page:534 Sinclair, Issue:5B, Page:038 Sinclair, Issue:5B, Page:044

BULK BULLETS SIERRA BULLETS, INC.

brownells Reloading

Quick View
Click here for price!$103.99 - $399.99
  (75)
    • Check Price
      • BULK BULLETS SIERRA BULLETS, INC.

      • Money-Saving 500-Count Paks Of Popular Varmint & Competition Bullets A favorite of match shooters and hunters for years, Sierra bullets give the quality and superior ballistic performance you need for superb accuracy from your reloads. Available in a variety of calibers and profiles, Sierra helps you match the bullet to your particular shooting situation. Bullets in each pak come from the same production lot for best load-to-load consistency. Big Book Catalog, Issue:68, Page:542 Sinclair, Issue:5B, Page:101